Air cooled chillers. Nominal cooling capacity 228 – 1303 kW

Description

The ARIES G chillers are the best solution for process cooling applications (such as automotive, plastic, chemical and pharmaceutical, food and beverage, wineries, machine tools, etc.), offering a large energy saving in all functioning conditions. The design philosophy is strongly oriented to reduce operating costs and to protect the environment with the introduction of the low GWP refrigerant R454B. The main characteristics of this range are scroll compressors for higher seasonal energy efficiency, high-efficiency shell and tube exchangers to perform in more suitable energy-saving conditions, and total heat recovery for sustainable use of absorbed electricity. The wide range of accessories and versions offers solutions to the most different installation requirements and at the same time facilitates installation, start-up, and management of the system.

• Low GWP refrigerant R454B (GWP 466);
• Seasonal efficiency compliant with the parameters required by the ErP regulation for SEPR HT (Tier 2 01/01/2021 – base version) and SEPR MT (Tier 2 02/07/2018 – low water temperature version, down to -10 °C);
• Acoustic configurations SHE and SSN with reduced sound levels;
• Extended working limits for starting up and operating even in the worst conditions;
• Wide choice of options and kits for easy installation;
• Easy access to all internal components;
• Advanced electronic control with web server integrated.

• Refrigerant R454B;
• 4, 6, or 9 hermetic scroll compressors are always connected in tandem or trio in two or three refrigerant circuits;
• Crankcase heater compressor and phase monitor;
• Shell & tube evaporator;
• “Victaulic” hydraulic connections kit (supplied for each unit);
• Electronic expansion valve;
• Axial fans complete with protective grids and die-cast aluminum airfoil blade profiles;
• Electrical cabinet protection rating IP54;
• Refrigerant and oil charge;
• Tests and checks performed on the factory;
• Electronic microprocessor controller with touch screen user display;
• Modbus RS485 serial output for connections to supervision systems;
• Master/slave configuration manageable between 2 units.

• HE – Basic acoustic configuration;
• SHE – Low noise acoustic configuration;
• SSN – Very low noise acoustic configuration.

• MWT version (down to -10 °C outlet water temperature);
• Low ambient temperature option (down to -20 °C);
• Stainless steel shell & tube evaporator;
• Single or twin water pump with low or medium head pressure;
• Water accumulation tank;
• Anti-freeze protection heaters for heat exchangers, pump/s, and water accumulation tank (if included);
• IN/OUT compressors valves;
• A soundproof jacket or housing for compressors (for HE configuration);
• High-efficiency EC brushless fans (base option for SSN version);
• Total heat recovery;
• Protection coating for condenser coils, suitable for installation in aggressive environments;
• Microchannels condenser coils;
• Metallic mesh filters for condenser coil protection;
• Soft starters to reduce by 20% the unit’s starting current.

• Antivibration mountings;
• Replicated remote user display;
• Supervision system xWEB300D PRO;
• Modularity kit (master/slave configuration from 3 to 7 units).